1 3

BAESA COLORS PAINT CENTER

BOYSEN® Permacoat™ Gloss Latex B-710

BOYSEN® Permacoat™ Gloss Latex B-710

₱300.00 PHP
₱300.00 PHP
Sale Sold out
Size

BOYSEN® Permacoat™ Latex is a 100% acrylic paint with excellent hiding and outstanding durability.

Technical Data

Principal Uses:

It is ideal for interior and exterior surfaces such as concrete, bricks, plaster, and drywalls.

Vehicle Type

Acrylic

Finish

B‑701
Flat
B‑710
Gloss
B‑715
Semi-Gloss

VOC (±2.0 g/L)

B‑701
5.9 g/L
B‑710
12.1 g/L
B‑715
4.6 g/L

Dry Time:

B‑701
Touch: 30 minutes
Recoat: 1 hour
B‑710
Touch: 1 hour
Recoat: 2 hours
B‑715
Touch: 1 hour
Recoat: 2 hours
*Measured at 25°C and 50% relative humidity

Density
(±0.05 kg/L)

B‑701
1.4 kg/L
B‑710
1.18 kg/L
B‑715
1.17 kg/L

Theoretical Coverage

B‑701
25-30 sq. m. as primer
30-35 sq. m. as topcoat
* per 4-Liters at 1.7-1.4 mils DFT
B‑710
30-35 sq. m.
* per 4-Liters at 1.7-1.4 mils DFT
B‑715
30-35 sq. m.
* per 4-Liters at 1.7-1.4 mils DFT
*Depending on surface texture and porosity

Tinting

Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B‑1466 Hansa Yellow and B‑1407 Toluidine Red are for interior painting only.

Thinning
Solvent

Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

Clean-up
Solvent

Water

Packaging

1-Liter, 4-Liters, and 16-Liters

Application

By brush, roller, or airless spray

SURFACE PREPARATION

New Concrete

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Drywall Substrates

Install and secure joints as per manufacturer's recommendations.

Repainting

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

PAINTING SCHEDULE

Primer:
BOYSEN® Permacoat™ Flat Latex B‑701
Putty:
BOYSEN® Masonry Putty B‑7311 (interior use)

BOYSEN® Acrytex™ Cast B‑1711 (exterior use)
2nd & 3rd coat:
BOYSEN® Permacoat™ Latex (any desired sheen and color)
View full details