BAESA COLORS PAINT CENTER
BOYSEN® Permacoat™ Series Flat Latex B-706 Tulle White
BOYSEN® Permacoat™ Series Flat Latex B-706 Tulle White
Regular price
₱740.00 PHP
Regular price
Sale price
₱740.00 PHP
Unit price
per
Couldn't load pickup availability
BOYSEN® Permacoat™ Latex is a 100% acrylic paint with excellent hiding and outstanding durability. It is ideal for interior and exterior surfaces such as concrete, bricks, plaster, and drywalls.
TECHNICAL DATA:
PRINCIPAL USES:
It is ideal for interior and exterior surfaces such as concrete, bricks, plaster, and drywalls.
VEHICLE TYPE: Acrylic
DRY TIME:
Touch: 30 minutes
Recoat: 1 hour
Recoat: 1 hour
DENSITY (±0.05 KG/L):
- B‑701: 1.4 kg/L
- B‑710: 1.18 kg/L
- B‑715: 1.17 kg/L
THEORETICAL COVERAGE:
- B‑701
30-35 sq. m. as topcoat
* per 4-Liters at 1.7-1.4 mils DFT
- B‑710
* per 4-Liters at 1.7-1.4 mils DFT
- B‑715
* per 4-Liters at 1.7-1.4 mils DFT
TINTING:
Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B‑1466 Hansa Yellow and B‑1407 Toluidine Red are for interior painting only.
THINNING SOLVENT:
Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.
CLEAN-UP SOLVENT:
Water
PACKAGING:
1-Liter, 4-Liters, and 16-Liters
APPLICATION:
By brush, roller, or airless spray
SURFACE PREPARATION:
NEW CONCRETE:
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B‑44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
DRYWALL SUBSTRATES:
Install and secure joints as per manufacturer's recommendations.
REPAINTING:
Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
