A-Plus A&B® Crystal Clear Casting Epoxy

A-Plus A&B® Crystal Clear Casting Epoxy is a professional grade 2-component pure epoxy resin that is mostly used for table tops, river tables, wood and marine works, and art crafts. It cures to a non-yellowing crystal clear glossy material that is extremely hard, durable, and resistant to abrasion, chemical spills, and UV exposure. It is formulated to have a slower curing time which makes it an ideal casting material for prolonged workability.

• 100% Solids, Superior Strength, Durability, and Hardness
  
• Specialized Crystal Clear Casting Epoxy
  
• Achieve up to 9000psi Compressive Strength(ASTM D695)
  
• Excellent Resistance to Water and Spillage of Chemicals and Oils
  
• Easily Sandable and Spreadable, For moulds up to 2″ Thick
  
• Compatible with Metallic Pigments and Dyes
  
• For Rivertables, Woodcraft, and other Marine Applications

SPECIFICATIONS:

Principal Uses: For casting mouldings, tabletops, rivertables, woodcraft, and other marine applications.

Sheen: Gloss

Surface Dry: 6 – 8 hrs

Dry Through: Cures overnight, full strength within 3 days

Thinning:  Use as supplied

Clean Up: A-Plus® PG Epoxy Reducer

Application: Direct pouring

Packaging: 1L, 4L

Mixing Ratio: 2:1

Pot life: 4-6 hrs

Compressive Strength(ASTM D695): 9,000 psi

Safety Precautions:

1. Surface to be applied on must be thoroughly cleaned, free of any contaminants that can affect adhesion such as wax, oil, grease, moisture, and loose particles.
2. WARNING! Pot life of mixed Epoxy and Hardener is around 4-6 hrs at room temperature.
3. Clean up excess material with A-Plus® PG Epoxy Reducer while material has not cured.

For River Table/Wood:

1. Make sure wood material is fully kiln dried/treated. Surface must be clean, dry, and free from foreign contaminants.
2. Sand surface smooth to eliminate surface imperfections.
3. Tape or seal the jointing gaps to avoid leaking of the casting material. Use a wood clamp for bigger moulds.
4. Apply 1-2mm A-Plus A&B® Crystal Clear Laminating Epoxy as a base layer to fill up initial cast/mould. Allow to cure for 2 hours before pouring casting epoxy.

APPLICATION PROCEDURE:

Safety Precautions:

1. Surface to be applied on must be thoroughly cleaned, free of any contaminants that can affect adhesion such as wax, oil, grease, moisture, and loose particles.
2. WARNING! Pot life of mixed Epoxy and Hardener is around 4-6 hrs at room temperature.
3. Clean up excess material with A-Plus® PG Epoxy Reducer while material has not cured.

For River Table/Wood:

1. Make sure wood material is fully kiln dried/treated. Surface must be clean, dry, and free from foreign contaminants.
2. Sand surface smooth to eliminate surface imperfections.
3. Tape or seal the jointing gaps to avoid leaking of the casting material. Use a wood clamp for bigger moulds.
4. Apply 1-2mm A-Plus A&B® Crystal Clear Laminating Epoxy as a base layer to fill up initial cast/mould. Allow to cure for 2 hours before pouring casting epoxy.