A-Plus Procrete® High Visco / Low Visco Construction Epoxy A&B 4L Set

A-Plus Procrete® High Visco Construction Epoxy is a thermosetting construction epoxy also known as a heavy-duty “concrete putty.” It is used for anchoring, bonding, caulking, grouting, repairing concrete, and other types of construction works where superior bonding is required. It has superior adhesion and cures to a very strong material resistant to water, chemical spills, temperature extremes, and mechanical abuse.

• 100% Solids Construction Epoxy
  
• Cures to an Extremely Tough, Hard, and Durable Bonding Material
  
• Superior Adhesion and Does Not Shrink
  
• Cures Even in Damp Conditions
  
• Highly Viscous, Vertical and Horizontal Application
  
• Fast curing, Easy Workability
  
• Ideal Bonding and Repair Adhesive for Most Construction Works

SPECIFICATIONS:

Principal Uses:
☑Bonding aid for new concrete to old/degraded concrete, wood, properly primed metal surfaces, and most construction materials
☑Bonding wood and metal to concrete substrates
☑Installing ceramics or glass tiles to
wooden or concrete surfaces
☑As concrete floor coating and/or sealer
☑Patching spalled and damaged areas on concrete structures
☑As tile adhesive and grout for regular tiles as well as natural stones like marble and granite

Coverage: Depends on thickness of application and surface porosity

Surface Dry: 4 – 6 hrs

Dry Through: Cures overnight. Abrasion resistance against foot traffic and mechanical works fully develops after three (3) days of curing.

Thinning: Use as supplied. If necessary, thin with A-Plus® PG Epoxy Reducer

Clean-up Solvent: A-Plus® PG Epoxy Reducer

Application: Putty Knife/Spatula

Packaging: 1L, 4L

Mixing Ratio: 1:1

Pot life: 1-2 hours

Compressive Strength(ASTM D695): 10,000psi

SURFACE PREPARATIONS AND PRECAUTIONS:

1. Surface must be thoroughly cleaned, free from any contaminants that may affect adhesion such as wax, oil, grease, rust, and loose particles.
2. Strip off loose and flaking old paint using either a spatula or putty knife. Sandblasting or powertool-assisted cleaning should be performed on highly corroded steel surfaces prior to application.
3. MIX WELL before using. Mixing ratio: 1:1 by volume, Component A and Component B. Pot life of mixed components is around 1-2 hours. Use different spatulas to avoid contamination. Do not put mixed components back into its original container.
4. Keep away from reach of children. Avoid breathing vapor, use with adequate ventilation.
5. Avoid prolonged contact with skin. Wash hands thoroughly after handling, before eating or smoking.
6. All solvent-based and oil-based paints and putties are Flammable!

PAINTING PROCEDURE:

1. Ensure proper surface preparation. To avoid wastes, mix just enough material for application within the indicated pot life.
2. Mix A-Plus Procrete® High Visco Construction Epoxy Part A (1 part) with Part B (1 part) thoroughly for 5 minutes. Make sure both components are mixed homogeneously.
3. For concrete repair, wet old substrate with damp water before applying epoxy mixture. Apply liberally using a putty knife/spatula on the old concrete substrate.
4. For jointing substrates, apply mixed material with a putty knife or spatula on the areas or surfaces to be joint. Press and secure firmly to ensure complete contact. Allow to at least cure before doing other construction works.
5. Pot life is around 1-2 hours. Allow 72 hours curing to achieve maximum strength. Scrape off excess material while in its uncured state.

Cleanup: Tools and/or equipment used during application should be cleaned immediately before the mixture cures. Use A-Plus® PG Epoxy Reducer or ordinary paint thinner as cleaning solvents. For soiled hands, wipe with cloth dampened with solvents followed by washing with soap and water.