DAVIES® Keramifloor™

DAVIES® Keramifloor™ is a two-pack, air drying, chemically-cured polyurethane coating developed for the protection of floors subject to high levels of wear and tear, where excellent chemical and physical resistance is required. It is an effective concrete, wood, and metal floor coating because of its outstanding life expectancy and performance, resistance to highly corrosive environments, high abrasion resistance, and superior adhesion.

Type: Acrylic-isocyanate Polymer

Finish: High Gloss

Color Range: White, Black, Clear and 7 Standard Colors

Recommended Coverage: 25 sqm / 4L / coat depending on surface roughness and porosity and application method.

Pack Size: 4L set

• Outstanding Weather Stability
• Optimum Chemical and Mechanical Properties
• High Water-penetration Resistance
• Superb Aesthetic Value
• Protection against Carbonation

FEATURES

• Outstanding Weather Stability
• Optimum Chemical and Mechanical Properties
• High Water-penetration Resistance
• Superb Aesthetic Value
• Protection against Carbonation

RECOMMENDED USE

• Industrial Plants
• Warehouse
• Commercial Establishment

PAINTING INSTRUCTIONS

Application Tools: Brush / Roller

Thinning: Dilute with not more than 10% KF-72 Keramifloor Reducer

Mix Ratio: Mix 3.75 Liters of DAVIES KERAMIFLOORTM Base to 0.25 Liter DAVIES Keramifloor Hardener

Mixing Direction:

1. Premix Keramifloor Base to a uniform consistency.
2. Add the entire contents of DAVIES Keramifloor Hardener to DAVIES Keramifloor Base and mix slowly but thoroughly for 5 minutes. It is better to transfer the contents to a bigger container for easy mixing.
3. Apply immediately with a roller or brush.
4. All mixed paint must be used within the POT LIFE time limit.

Pot Life: 28°C: 2-3 hours

Surface Preparation:

New Concrete

• New concrete and cement plastered surfaces must be thoroughly cured for 28 days before painting, having a moisture content of less than 15% and a pH below 9.
• Remove concrete laitance and other impurities.
• Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials, and other possible contaminants.

Painting System

A. Concrete (Plain Finish)

Primer/Sealer: Apply one (1) coat of DAVIES EPS-050 Eposeal

Topcoat: Apply two (2) coats of Keramifloor

B. Concrete (Non-Skid Finish)

Primer/Sealer: Apply one (1) coat of EPS-050 Eposeal

Broadcast aggregates on wet DAVIES EPS-050 Eposeal at 1kilo/sqm and dry overnight. Dust off aggregates

Topcoat: Apply two (2) coats of Keramifloor

C. Ferrous Metal Surfaces

Primer/Sealer: Apply one (1) coat of DAVIES Epoxy Primer Topcoat: Apply two (2) coats of Keramifloor

Drying Time:

Dry to touch - 8 hours

Light Traffic - 3 days

Full Traffic - 7 days

Clean-Up: DAVIES KF-72 Keramifloor Reducer

STORAGE AND HANDLING

• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage
• In case of spillage absorb with inert materials such as sand.