DAVIES® Powerfloor™

DAVIES® Powerfloor™ is a two-pack high-performance epoxy floor coating designed to provide tough and durable protection to interior concrete floors. This 100% solid one-coat system forms a smooth glossy finish with outstanding resistance to abrasion and impact, and solvent and chemical spillage.

Type: Epoxy-Polyamine Polymer

Finish: Smooth Glossy

Color Range: 

• PF-00 Marking White
• PF-10 Rustic Red
• PF-21 Classic Blue
• PF-31 Tropical Green
• PF-40 Canary Yellow
• PF-60 Black
• PF-61 Velvet Gray
• PF-64 Dark Velvet Gray
• PF-90 Sand Beige

Recommended Coverage: 16 sq.m / 4L / coat 

Pack Sizes: 4-liters set

Features:

• 100% solids - one coat high-build finish
• Superior abrasion and impact resistance
• Excellent water and chemical resistance
• Very good to adhesion and dirt pick-up resistance
• Easy to apply and clean - high gloss smooth finish

Recommended Use:

For concrete floors such as:

• Residentials
• Schools
• Hospitals
• Food Processing
• Factory Units
• Warehouses
• Floor Markings

Painting Instructions:

Application Data:

Application Tools: Brush/Roller

Thinning: If necessary, dilute with not more than 5% DV-95 DAVIES® Epoxy Reducer

Mix Ratio: Mix 3 volume parts of DAVIES® Powerfloor Base to 1 volume part DAVIES® Powerfloor Hardener

Pot Life: 30 minutes to 1 hour

Surface Preparation: 

New Concrete

• New concrete and cement plastered surfaces must be thoroughly cured for 28 days before painting, having a moisture content of less than 15% and pH below 9.
• Remove concrete laitance and other impurities.
• Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials and other possible contaminants.

Mixing Direction:

1. Premix DAVIES® Powerfloor Base to uniform consistency.
2. Add the entire contents of DAVIES® Powerfloor Hardener to DAVIES® Powerfloor Base and MIX SLOWLY but THOROUGHLY for 5 MINUTES. It is better to transfer the contents to a bigger container for easy mixing.
3. Apply immediately with a roller or brush.
4. All mixed paint must be used within the POT LIFE limit.

Painting System:

Primer/Sealer: Apply one (1) coat of DAVIES® Eposeal 

Topcoat: Apply one (1) coat of DAVIES® Powerfloor

Drying Time:

Dry to Touch - 8 hours

Light Traffic - 24 hours

Full Traffic - 7 days

Clean Up: DV-95 DAVIES® Epoxy Reducer

Storage and Handling:

• Keep containers closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.