1 3

BAESA COLORS PAINT CENTER

NATION™ DREAMCOAT™ 1540 FLAT LATEX

NATION™ DREAMCOAT™ 1540 FLAT LATEX

₱370.00 PHP
₱370.00 PHP
Sale Sold out
Size
Nation™ Dreamcoat™ Latex is a budget-friendly, water-based paint. It is the ideal choice for quality at an affordable price. It is ideal for interior concrete, bricks, plaster, and drywalls.

TECHNICAL DATA

PRINCIPAL USES:

It is ideal for interior concrete, bricks, plaster, and drywalls.

VEHICLE TYPE:

Co-polymer

FINISH:

  • NS-1540 Flat
  • NS-1541 Gloss

VOC (±2.0 G/L):

NS-1540 Flat
0.49 g/L
NS-1541 Gloss
1.42 g/L

DRY TIME:

NS-1540 Flat
Touch: 30 minutes
Recoat: 1 hour
NS-1541 Gloss
Touch: 1 hour
Recoat: 2 hours

DENSITY (±0.05 KG/L):

  • NS-1540 Flat - 1.12 kg/L
  • NS-1541 Gloss - 1.11 kg/L

THEORETICAL COVERAGE:

25-30 sq. m. * per 4-Liters at DFT

TINTING:

Will accept BOYSEN® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B‑1466 Hansa Yellow and B‑1407 Toluidine Red are for interior painting only.

THINNING SOLVENT:

Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

CLEAN-UP SOLVENT:

Water

PACKAGING:

  • 1-Liter
  • 4-Liters
  • 16-Liters

APPLICATION:

By brush or roller

DRY FILM THICKNESS:

1.7-1.4 mils

 

SURFACE PREPARATION

NEW CONCRETE:

Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part NATION Masonry Neutralizer NS-10 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

DRYWALL SUBSTRATES:

Install and secure joints as per manufacturer's recommendations.

REPAINTING:

Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B‑141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.
For repainting concrete with a chalky surface, use BOYSEN® Chalk Blocker™ B‑7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

PAINTING SCHEDULE


1st coat:
Nation™ Dreamcoat™ Latex Paint White NS-1540
Putty:
BOYSEN® Masonry Putty B‑7311
2nd & 3rd coat:
Nation™ Dreamcoat™ Latex Paint White NS-1540 or Nation™ Dreamcoat™ Gloss Latex White NS-1541
View full details