Rain or Shine 301 Royal Blue Elastomeric Paint
Rain or Shine 301 Royal Blue Elastomeric Paint
Rain or Shine Elastomeric Waterproofing paint is a self-priming water-based waterproofing paint for exterior and interior concrete surfaces.
Material Description:
Use:
- Self-priming topcoat for concrete substrate
Appearance:
- Low Sheen
Coverage:
- 20-25 sq. per 4 litres depending on the porosity of the surface
Application Method:
- Brush or Roller
Reduction:
- Use as packaged
Application:
For new concrete:
New concrete should be given enough curing time ranging from one week to one month to reduce water and alkali to a safe level. Excess alkalinity should be neutralized with Concrete Neutralizer. Allow the surface to dry thoroughly. Dust off crystalline deposits if there are any.
Apply (1) coat of Rain or Shine Fresco Odourless & Antibacterial Paint or ROS-8000 Rain or Shine Elastoproofer as anti-efflorescence primer.
Repair all minor surface imperfections with Rain or Shine Mastic Putty (ROS-3000).Let dry and then sand. Drying time of Rain or Shine Mastic Putty (ROS-3000) depends on the wet film thickness of the applied putty.
Apply two coats Rain or Shine Fresco Odourless & Antibacterial Paint . Allow 2-4 hours drying in between coats.
Renovation/Repainting:
Remove any flaking or peeling paint. Clean and sand old paint in good condition and dust-off before repainting.
Apply (1) coat of Rain or Shine Fresco Odourless & Antibacterial Paint or ROS-8000 Rain or Shine Elastoproofer as anti-efflorescence primer.
Repair all minor surface imperfections with Rain or Shine Mastic Putty (ROS-3000). Let dry and then sand. Drying time of Rain or Shine Mastic Putty (ROS-3000) depends on the wet film thickness of the applied putty.
Apply two coats Rain or Shine Fresco Odourless & Antibacterial Paint . Allow 2-4 hours drying in between coats.
Caution:
Do not apply paint when humidity is high as heavy moisture content in the air will affect the performance of the coating